ZY6122A Flight Data Recorder (Black Box) Combustion Tester
Highlights
1. Designed for Aviation Material Flammability Testing
Specifically designed for airworthiness certification and performance testing of non-metallic materials used in civil aircraft cabins.
2. Multiple Combustion Test Configurations
Supports adjustable combustion angles of horizontal, vertical, 45°, and 60°, accommodating combustion test methods at these angles, enabling a single system to meet the requirements of various test configurations.
3. 0.5 m³ Combustion Chamber
Equipped with a combustion chamber with a volume of ≥0.5 m³, providing ample internal space for specimen installation, burner positioning, and test observation.
4. Viewable Tempered Glass Observation Window
A large, sealable tempered glass observation window is located at the front of the combustion chamber, allowing operators to clearly observe the ignition and combustion behavior of the specimens during the test.
5. High-Precision Gas Pressure Regulation
A high-precision pressure regulating valve is used to adjust the gas pressure required for standardized combustion testing.
6. Integrated Exhaust System
A powerful exhaust and smoke extraction system is installed at the top of the test chamber to remove combustion gases after the test is complete.
7. Temperature Calibration System
This tester is equipped with a temperature calibration device compliant with the ASTM D5207 standard, featuring a Type K thermocouple and an intelligent PID temperature display.
Method
The ZY6122A supports flammability testing of civil aircraft cabin non-metallic materials in accordance with FAR 25.853 Appendix F, CCAR-25-R4.853 Appendix F and HB5469-2014.
Supported test configurations include:
Vertical Burning Test
Horizontal Burning Test
45° Burning Test
60° Burning Test
The system features dedicated specimen holders, adjustable burner angles and flame height, motor-driven specimen positioning, and flame measurement devices to meet different test configurations.
A 50 W Bunsen burner is used for flame application, with temperature calibration supported by the built-in thermocouple system and ASTM D5207-compliant calibration device.
Specifications
| Component | Configuration |
|---|---|
| Combustion Chamber | ≥0.5 m³ chamber, high-quality steel construction with electrostatic spraying and high-temperature baked coating |
| Observation & Exhaust System | Sealed tempered-glass observation window with top-mounted exhaust system for post-test smoke and gas removal |
| Burner System | 50 W Bunsen burner, compliant with IEC 60695-11-4:2004 Flame A, B or C requirements |
| Burner Dimensions | Ø9.5 ± 0.1 mm burner outlet, Ø0.9 ± 0.03 mm gas jet, 100 ± 10 mm from burner outlet to air inlet |
| Burner & Flame Adjustment | 0°, 45°, 60° and 90° adjustable burner angle; 20–100 mm adjustable flame height |
| Temperature Sensor | Electrolytic copper sensor, 8.8 ± 0.02 mm length and Ø5.5 ± 0.01 mm diameter |
| Temperature Measurement | K-type thermocouple with Ø0.5 mm stainless-steel protective tube and intelligent PID temperature indicator, reading >1000°C |
| Temperature Calibration | Movable temperature measurement system with ASTM D5207-compliant calibration device and 0.1 s electronic stopwatch |
| Specimen Holder | Stainless-steel holders for horizontal, vertical, 45° and 60° burning tests; maximum specimen thickness ≤13 mm |
| Specimen Positioning | Motor-driven specimen holder with ≤100 mm vertical adjustment and ≤70 mm horizontal adjustment |
| Flame Measurement | Scale set for measuring inner and outer flames during horizontal and vertical burning tests |
| Measuring Ruler | 500 mm stainless-steel ruler with 1 mm graduation |
Consultancy & Sales
Do you have further questions about the instrument or the method and would like to speak to a sales representative?
Service & Support
Do you already have an instrument and need technical support or spare parts?